Here is what is currently possible (8PI Control Panel version 2.03 / SPI Storm Studio version 1.1.8). 1) Multiple devices that use 8PI Control Panel as control software can be used on the same PC. This applies to GP and Xpress series devices being used together.…
No you can't. SPI Storm is an advanced SPI, Dual-SPI, Quad-SPI and custom protocol host adapter (Master). SPI Xpress / GP Series devices in SPI mode of operation can be used as SPI Master and/or SPI Analyzer. I2C Xpress / GP Series devices in I2C mode of…
Schematically, using SPI Storm device requires the following steps: 1) Define a configuration file (.ssp) The configuration file contains the following information: - It contains the definition of the accesses that you'll use with SPI Storm device (by means…
Please go through the following steps: 1) If you don't have it, please request your license file to Byte Paradigm. ! You need to provide your SPI Storm unit serial number ! (click here) 2) Start SPI Storm Studio 3) Click on Help > Install License The 'License…
Yes, with SPI Storm, where you have a 8-bit GPO (General-purpose output) port for generating digital patterns, synchronized or not with the serial port. SPI Xpress and GP Series devices in SPI mode of operation do not offer additional GPIO lines.
Paper abstract SPI Storm is Byte Paradigm’s USB Serial Protocol host adapter. SPI Storm supports SPI (Serial Peripheral Interface), 3-wires SPI, dual-SPI, quad-SPI protocols as a master. It also allows the control of custom serial protocol interfaces up…
Select the 'Standard SPI' tab from the main window. There 2 main areas in this tab: 'Devices Definition' and 'Macros Definition'. The 'Devices Definition' area defines the characteristics of the SPI protocol used for each device; The 'Macros Definition' area…
Ask a Question 
