Here is what is currently possible (8PI Control Panel version 2.03 / SPI Storm Studio version 1.1.8). 1) Multiple devices that use 8PI Control Panel as control software can be used on the same PC. This applies to GP and Xpress series devices being used together.…

No you can't. SPI Storm is an advanced SPI, Dual-SPI, Quad-SPI and custom protocol host adapter (Master). SPI Xpress / GP Series devices in SPI mode of operation can be used as SPI Master and/or SPI Analyzer. I2C Xpress / GP Series devices in I2C mode of…

You'll need to check our GP series devices. Only our GP series devices currently function as a logic analyzer. Currently the following models are available: - GP-22050 : 50 MHz max. sampling frequency; 16 kB sample memory; 16 bits wide max. - GP-24100 : 100…

Here are the possible choices: 1) SPI Storm device: SPI, 3-wires SPI, dual-SPI, quad-SPI and custom serial protocol host adapter. 100 MHz max. frequency. This device also features a 8-bit GPO (General-Purpose Output) port that can be used to generate arbitrary…

Here are the possible choices: - I2C Xpress device: SPI Master (SPI host adapter) / Analyzer for 4 wires and 3 wires SPI protocols. - GP series device with I2C mode of operation option. I2C mode of operation is enabled for these devices in the 8PI Control…

Yes, with SPI Storm, where you have a 8-bit GPO (General-purpose output) port for generating digital patterns, synchronized or not with the serial port. SPI Xpress and GP Series devices in SPI mode of operation do not offer additional GPIO lines.

If you need to generate long patterns, it is always preferable to choose the digital pattern generator device with the biggest internal memory. The maximum pattern depth depends on the following: - the data rate at the interface with your system under test.…

Paper abstract SPI Storm is Byte Paradigm’s USB Serial Protocol host adapter. SPI Storm supports SPI (Serial Peripheral Interface), 3-wires SPI, dual-SPI, quad-SPI protocols as a master. It also allows the control of custom serial protocol interfaces up…

Paper Abstract SPI Xpress is Byte Paradigm’s SPI protocol exerciser and analyzer. It is controlled from a PC through a USB 2.0 high speed interface. It allows debug, analysis, programming and testing of chips and electronic boards that use SPI for chip-to-chip…

Yes, it is possible. Control from Visual Basic should be done by calling functions from our C/C++ DLLs. Please click here to download Visual Basic examples from our support pages. Disclaimer: these guidelines and examples are provided 'as is'. Byte Paradigm…